Removing The Transmission Oil In A Mitsubishi FTO

Can you tell me how to removing the transmission oil in a Mitsubishi FTO ??

Answer : Only about 30% of the oil can be drain by removing the pan assembly. You can’t just drain it all out as the majority stays in the torque converter and fluid lines. Transmission fluid is renewed by flushing which requires disconnection of the oil cooler hoses and extension hoses to be fitted.

Fresh oil is sucked from a full container and the old fluid is pumped from the box to an empty container using the connections above.
You need about 5 gallons to do the job properly.


About indrahusada88

Just A Beginner
This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s